Bronco Upgrades Available | JKS New Product Announcement
JKS8300 - Max Tire Clearance Kit
As new Broncos are beginning to hit the trail, there is a need in the market to improve capability and upgrade other aspects of Ford's design. One upgrade that is apparent is the need to optimize the front wheel opening for maximum clearance. Aftermarket tire fitment is limited by the front body mount brackets and intrusion beams. Regardless of lift height (stock or lifted) this will affect clearance and limit tire size. The solution, is the Max Tire Clearance Kit from JKS Mfg. By replacing the front body mount with a high clearance body mount and adjusting the profile of the inner fender liner with new brackets, larger tires can be installed with increased clearance through full wheel travel.- Allows for larger tire fitment at all ride heights - Max tire size is dependent on lift height.
- Full clearance through wheel travel at 2-4" of lift with 37x12.50 tires (17x9 to 20x9 with 4.5-5.5" backspacing recommended).
- High clearance body mount provides a clean look with mid-width and stubby bumpers.
- Heavy duty 3/16" steel brackets.
_________________________________________________________________________
JKS9700 - Steering Sleeve Kit
As capable as these new Broncos are out on the trail, the factory steering tie rod ends have proven to be a weak point when running larger tires, breaking at the threaded rod. JKS has the solution with a new sleeve kit designed specifically for the Bronco's factory tie rod ends. This heavy-duty sleeve kit reinforces your steering by replacing the OE jam nut with a robust sleeve that supports the tie rod from bending or breaking. Designed to be used on a variety of lift heights, this sleeve kit still allows full tow adjustment to dial in front end alignment. Installation is quick and easy to give you confidence and peace of mind to push your Bronco to the limit out on the trail.Made from cold-rolled 1215 steel, 1" OD.
- Prevents tie rods from bending when subject to off-road situations.
- Increase steering link diameter through the weakest section of the tie rod.
- Works for all lift heights when used with the OE inner tie rod end.
- Allows full range of OE toe adjustment.
- Machined from cold rolled 1215 steel, 1" OD.
Media Contact:
JKS Manufacturing | 517-278-1226 | sales-jks@ridefox.com