Home - Return to Previous Page
Additional Images

Coilover Mounting Kit | Rear | Jeep Wrangler JK


Rear Coilover Mounting Kit for Jeep Wrangler JK

  • Complete bolt on bracket system to convert the rear JK coil spring suspension to a coilover
  • Bracket system designed to accommodate Fox 2.5 coil-overs. Everyone else uses 2.0s
  • Fox coilover are valved specifically for the JKS system and utilize the DSC adjustment for up to 25% range of adjustment to compression dampening
  • Fox coilovers are loaded with a dual range spring setup that allows for optimized ride quality, articulation, and load carrying capacity.
  • The bracket design mounts off factory brackets (after some trimming) for precise location. The new coil-over bracket includes an integrated reservoir mount.
  • All brackets powder coated the signature JKS semi-gloss black and include the popular stainless steel JKS mountain logo.
    1. Kit is designed as an upgrade for lifted JKs, if installing on a stock height JK additional modifications will be necessary to correct suspension/driveline geometry.
    2. Requires cutting of the factory shock mounts and is not designed to allow the vehicle to go back to stock configuration.
    3. Requires a minimum of 2" of additional rear bump stop height from factory (included with more lift kits)
    4. Reservoir mounts are not designed to work with the factory rear bumper.
    5. This part does NOT include the Coilovers
    6. You will need to purchase part number: FOX88406177
    Pricing: $562.03


    Designed to compliment the available front coilover conversion, this rear coilover conversion takes performance to a whole new level to maximize damping capability while allowing for more suspension travel and simple tunability for any terrain. Custom valved 10” travel FOX 2.5 factory race series coilovers with remote DSC reservoir are mounted in place with a set of JKS upper and lower mounting brackets. These bolt-on brackets are built from high quality American steel and finished in a durable gloss black powdercoat. With the lower mount designed for improved clearance to help keep the coilovers tucked up out of harms way out on the trail. These FOX 2.5 coilovers offer race proven technology with a larger 2.5” diameter body, dual rate springs, improved oil capacity, large 7/8” hard chrome plated shade and (DSC) dual speed compression adjustment technology. The DSC allows for for 12-clicks of high speed and 10-clicks of low speed compression adjustment to dial in how the shocks performance in various terrains. This coilover conversion is compatible with most lift kits on the market and use a threaded body allowing for preload adjustment to set ride height for between 2-5” of lift while still offering plenty of suspension travel. All hardware as well as detailed step-by-step instructions are supplied. Take your JK to the next level with this rear coilover conversion from JKS.

    Shipping Information

    • Item Requires Shipping
    • 28.5 lbs.
    • W17.0000” x H9.0000” x L9.0000”