Products

The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards...

JKS Complete Front Coilover Conversion for Jeep Wrangler JL & Gladiator JTTransform your Jeep Wrangler JL or Gladiator JT into a trail-conquering powerhouse with the JKS Complete Front Coilover Conversion. This cutting-edge suspension upgrade pushes performance boundaries, delivering superior damping capability, extended suspension travel,...

Pull out all of the stops by upgrading to JKS complete rear coilover conversion for the Jeep Wrangler JL. Designed to compliment the available front coilover conversion, this rear coilover conversion takes performance to a whole new level to maximize damping capability while allowing...

You want FOX Coil-overs on your JK Jeep Wrangler. JKS has the strongest easiest-to-install Coil-over conversion system in the industry. This kit fits the front position and accepts FOX 2.5" 10" travel Coil-overs -- including provisions to mount remote reservoirs. In addition to the...

Designed to complement the JKS front Coil-over conversion kit for Jeep Wrangler JK, this rear system is just as strong, comprehensive and easy to install. The rear position kit accepts FOX 2.5" 10" travel Coil-overs -- including provisions to mount remote fluid reservoirs. In...

These MiniSkids are specifically designed for the front axle of the Jeep JK and will work with both factory and aftermarket control arms. Using heavy-duty 1/4" steel plate construction, the low-profile design allows you to add protection for your lower control arms with the...

These MiniSkids are specifically designed for the front axle of the Jeep JK and will work with both factory and aftermarket control arms. Using heavy-duty 1/4" steel plate construction, the low-profile design allows you to add protection for your lower control arms with the...

Features & Benefits: LJ Corner Guards 5" Stretch - Aluminum Bolt Pack Sticker Pack Product comes e-coated and powdercoated black Material: Aluminum Thickness: 3/16" Wheelbase: TJ Unlimited (LJ) 5" Stretch Opening Taillights: No Gas Filler: No

If your rig has a trailer hitch, this is a fantastic tool to add to your recovery gear. Locked into the receiver hitch, you now have a centralized rear tow point, with 3/4" forged shackle with 11,000 lbs of working limit.

One of those go-to items that should always be in your recovery bag, a forged 3/4" shackle with 7/8" screw-in pin. 10,500 lbs of working limit to help pull you from the stickiest situations

JKS Master Service Pack helps you prepare for any maintenance work or trail back up repairs. Includes replacement parts for almost every type of JKS wearable item.

JKS Manufacturing's Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased...

We've made changes and much needed improvements to the drop down tailgate.

Convert the electronic sway bar on your Jeep Wrangler JK to a more reliable manual cable with a JKS Sway Bar Cable Conversion Kit. The electronic front sway bar disconnect system or SmartBar equipped on Wrangler JK Rubicon models was a welcome addition and...

A JKS Exhaust Extension Kit is required for proper driveshaft clearance after installing a lift kit on your 2007-2011 Jeep Wrangler JK. When installed, this kit adds clearance between the front driveshaft and the passenger's side exhaust crossover tube. Precision CNC-machined DOM steel tube...

Properly install a lift kit on your Jeep Wrangler TJ or LJ with JKS extended front brake line kit. The high performance design eliminates soft, spongy brake pedal response of standard hoses. Includes extended 22" long brake lines for lifted applications and extreme axle...

Modify your custom Jeep or one-off project's sway bar angles to work with lifted suspension with weld-on extended sway bar mounts. The design offsets the sway bar mounting point to axle housing position 2 in. higher than stock. Designed to replace OE mounts on...

Heavy Duty Jam Nut Kit for Jeep WJ knuckle conversions. M24 -1.5 Thread; Threads onto WJ tie rod ends; Includes one each left-hand and right-hand jam nuts. Zinc plated for corrosion resistance. Bolt-on. See also JKSOGS956 Heavy Duty Drag Link kit.

Upgrade the weak shock mounts on your Jeep Cherokee XJ with the JKS FAB rear axle shock mount kit. High clearance mounting bracket allows repositioning of shock absorber mount on axle housing for improved clearance or geometry Universal shape accommodates any axle tube with...

JKS is all about developing performance and reliability solutions like this weld-on heavy duty steering stabilizer mount. The universal design mounts a stabilizer shock on a custom steering system. Position the steering stabilizer for improved clearance or geometry, then weld the wide, 1 inch...